This website is a work in progress. Scroll the down this page to find the list of spinning wheel makers.

Spinning wheels made in England, Ireland, Scotland and Wales during the 20th century

The aim of this website is to provide a resource for learning about spinning wheels made in the UK during the 20th C, with some reference to older traditions and to wheels made elsewhere that turn up in the British Isles.

During the early 20th century handspinning continued as an unbroken tradition on the Scottish isles of Shetland, Orkney and the Hebrides as well as in rural places on mainland Britain and in Ireland. However industrialisation of the textile industries meant that in much of the British Isles the skills of wheel making and spinning had been forgotton, and through the early 20th century skills were still being lost. Norman Kennedy, who grew up in Aberdeen in the 1950s recalls seeking out old folk to teach him spinning and weaving skills in mainland Scotland and the Shetland Isles.(1) Even as he did so hand spinning was becoming rare: although in 1922 most women in Shetland carded, spun and knitted wool, by 1939 most of the wool from the Shetland Isles was being spun on machinery in Scottish mills.(2)

(sources: (1)From Wool to Waulking with Norman Kennedy, DVD from Interweave/F + W Media 2012; (2)Shetland Textiles 800 BC to The Present, ed. Sarah Laurenson, pub. Shetland Heritage Publications 2013)

(More information to follow here about Ethel Mairet and contemporaries incuding Rita and Percy Beales. Also the founding of Guilds of Weavers, Spinners and Dyers and their role in maintaining and teaching skills.)

During the first half of the 20th C up until the 1970s most new spinning wheels for British handspinners were imported from Scandinavia by suppliers including: Dryad, F.A Goodlife, Frank Herring & Sons, The London School of Weaving.

Later, in the 1970s there was generally more interest in traditional crafts and during this period many woodworkers took up making spinning wheels to supply the new demand from those learning to spin yarns from wool, flax and other fibre sources. Intially many were copies of Scandinavian wheels but traditional styles of Scottish, English and Welsh wheels were revived and became popular together with new designs. Also from 1970s onwards spinning wheels were being imported from other countries - including Scandinavia and new Zealand.

This website is a work in progress. If you are able to assist with information about British spinning wheels and their makers please get in touch with website author Dorothy Lumb via the YarnMaker website - this website is still live and maintained in 2022 to provide information about the magazines published between 2010 and 2016.

This page has some basic information and links to help people who would like to learn how to use a spinning wheel.

On the page linked to here you will find links for a pdf download of a Spinner's Record Card, designed by Jill Shepherd for your personal use.

LINKS HERE TO

Dutch Vintage Spinning Wheels website

New Zealand spinning wheels website

Australian spinning wheels website (note: to view this site you need to have Java script enabled in your browser)

there is a team working on a website for spinning wheels made in the USA, when it is online I will post a link here.

Link to the last spinning wheel maker in Ireland, Johnny Shiels, who makes wheels of a style traditional to Ireland but which has also been copied by makers in the Lake District and Isle of Man.

 

LIST OF SPINNING WHEELS MADE IN BRITAIN DURING 20TH CENTURY

I am sure there are also many more spinning wheel makers in England, Wales, Scotland and Northern Ireland working in the 20th C who are not yet in this list, as well as incomplete entries, and I welcome any information that you are willing to share. PLEASE NOTE THAT YOU CANNOT CLICK TRHOUGH FROM SMALL PHOTOS TO LARGER ONES. However, I am working on adding extra pages for each wheel to display extra photographs and information so there are a few links in the text.

At the bottom of this page a second list has some photos and/or details of wheels for which we don't know the maker, please take a look and see if you can help with identification. Click here for a short cut to the mystery wheels section.


AYLWARD - Spinning wheel by this maker pictured in 1981 Dryad Leaflet 532 Spinning on the Wheel. It has a solid disk for the drive wheel, a single treadle a leaf-spring for the scotch tension brake above the flyer and metal flyer arms.


ARDICI of Wooten Bassett. Maker of a Scandinavian style wheel that has a flat double-table with three legs, single treadle, large diameter drive wheel.

Ardici spinning wheel


BARBICAN CRAFTMANSHIP model: QUANTOCK. At this stage all I have is written description from an ebay sale. The wheel had a plywood drive wheel with both a weight in it and a hole through. It has an integral carrying handle, is 70cm tall, drive wheel 33cm. There was a separate lazy kate to go with it, and the maker was Pete Beard of Plymouth. If you know more, please get in touch.


BARKER - Mr Barker is known to have made many wheels at his workshop in Felin Cochwillan, Taly Bont, Bangor, Wales, probably from mid 1970s to late 1980s by which time he was advanced in years. More information about this maker and photographs would be appreciated, if anyone reading this can help.


BARTON CRAFTS e-spinner. Based in Radlett, Hertfordshire. Made an electric spinner from hardwood and advertised them in The Weavers Journal n 136, Autumn 1985. Described by one owner of a machine over 30 years old and still in use as "fab, very smooth and easy to control because of the foot pedal. It's really nice not having to use your hand [to access the controls] when you want to stop spinning."

Barton Crafts E-spinner.


BERNEY - see entry for KEITH AND LOIS BERNEY

BILL GAYLOR - a spinner and wheel builder, probably based in Buckinghamshire (was a member of the Bucks Guild of Weavers, Spinners and Dyers). Bill made spindles but is also known to have built at least two spinning wheels, an upright and a type of pendulum wheel based on a patent granted to Canadian designer Thomas Wright in 1871. Pendulum wheels are like a great wheel with the spindle on an arm, balanced by a weight, which moves away from the spinner as the spinner leans on a treadle enabling a longer length of yarn to be spun before winding on to the spindle. The speed of the spindle is increased by an simple gear mechanism. Thomas Wright's design is compact with a smaller drive wheel than other pendulum type wheels (around 110cm) and the spindle on an arm that pivots near the floor.


BILL STABLES (born 1913) made spinning wheels at his workshop on Market Street, Ulveston, Cumbria. He may have been working there in the 1950s and one wheel is dated 1984. I am told the style of wheel copied by Bill Stables is also fairly common on the Isle of Man, and has features in common with Irish spinning wheels. (See entry for Jimmy Shiels for a typical Irish Flax wheel). Flax spinning was established in the Lake District in Victorian times when John Ruskin established a local linen industry with with 15 spinning wheels in 1882 for the Lakeland Spinners. These were made by a local bobbin turner/carpenter in the Coniston Area called Mr Coward and were based on a wheel from the Isle of Man.

Wheels that were made by Bill Stables may have a small oval brass plaque bearing his name, and a couple we have seen have a treadle that extends forwards from the support bar with a curved end under the spinner's heel - this is not seen on the antique wheel of this style which finishes at the treadle bar. We do not know how many of the wheels looking like this were made by Bill Stables and how many are older, nor do we know how to tell if a wheel without a makers plaque were made by Bill or an earlier maker.

Bill


COLIN KITE - a member of the Somerset Guild of Weavers, Spinners and Dyers who made around half-a-dozen great wheels.


CROWDYS WOOD PRODUCTS  Based in Clanfield, Oxford, where they made and sold wheels from their own showroom. Advertised in The Weavers Journal no.116 Winter 1980: Spinning wheels, upright, horizontal and sloping bed. Practical and attractive designs in variety of timbers. Illustrations and list will be gladly sent on request. We also supply carders, drop spindles and skein winders (niddy-noddy). Visitors are most welcome to inspect and try wheels at our workshop and showroom (open Monday to Saturday 9am to 6pm). They made wheels in 24" drive wheel size with a split table, and 27" , and used various hardwoods including yew, elm and beech. The 24" wheel is pictured below, follow this link to a special page with more detailed pictures of Crowdy wheels.

Crowdy of Oxford spinning wheel

Follow this link for a special page dedicated to the Crowdy spinning wheels.

DP POLSON - the Heritage Centre, Unst, Shetland, has two spinning wheels made by DP Poulson of West Yell, Shetland. One is a small, saxony-style wheel with a sloping bed and three legs, made in 2011. The other is an upright wheel. See also Hamish Poulson.


DAVID BRYANT various types of spinning wheel made by the British expert on antique spinning wheels, plans for several of his designs were published in a book and are still available on his Craft Designs website. Wheels actually made by David Bryant himself bear his plaque. Design sold include traditional types of SHETLAND, ENGLISH and NORWEGIAN wheels as well as  an UPRIGHT SPINNING WHEEL, CONNECTICUT CHAIR WHEEL, ARKWRIGHT STYLE, SAMUEL CROMPTON STYLE, SPINDLE WHEEL, GREAT WHEEL, SLOPING SPINNING WHEEL.


Mr P CHURCH - Hockwold cum Wilton. Maker of at least one spinning wheel in 1988, a small fold-up travelling wheel with pretty marquetry on both the drive wheel and treadle. Printed on the underside of the treadle is: Hockwold cum Wilton, 1988, P. Church. Please get in touch if you know anything about this maker or his spinning wheels.


DAVID CRUMP A large double-drive flax spinning wheel, bearing the makers mark on the end of the table under the mother-of-all: David Crump, Newdigate, Surrey. This appears to be a very fine working wheel, and ideal for fast spinning. It has a tall distaff mounted above the wheel and large difference in size of the pulley whorls on the bobbin and the flyer to give a strong draw-in for the yarn onto the bobbin. The large drive wheel stands over a flat, rectangular table. The drive band is tensioned by a tension screw from the wheel uprights that runs through the mother-of-all (M-o-A) with a nut on the left hand side of the M-o-A. The flyer supports are mounted in slots, with a nut ender the M-o-A and when the nut is slackened off the uprights can be moved to release the bobbin. The styling of the flyer itself shows Scandinavian influence and the hooks are bent-wire type. Flyer bearings are of plastic mounted in wood (several wheel makers in the 70s and 80s moved into using self-lubricating plastics that were designed for industrial bearing use). Estimated date of manufacture any time from mid 1970s to 1990.

David Crump flax spinning wheel

Click here for more photos of the spinning wheel made by David Crump.


DAVID S DIXON/ D.S. DIXON
Upright wheel with treadle that folds up, and four legs of which the front two fold backwards. The  flyer arms are attached to flyer whorl, the orifice is a wire loop on the end of the flyer arm, bobbin is held on behind a nylon nut on the flyer shaft.   The wood is mahogany coloured, apart from the bobbin which is a light colour. Very small drive wheel, much smaller than the flyer, driven by a leather belt. Makers name stamped into the wood on the rear of the upright at the back. Brass carrying handle fitted at the same point as the signature. Believed to date from 1980s (based on date of purchase given by an Ebay seller). A second wheel spotted on Ebay in 2016 was made according to a commonly used design published in The Woodworker magazine in the 1970s, which is the same design developed into the "Lonsdale" by James Williamson and the "MacDonald" by Martin Reeve.

David Dixon folding spinning wheel


DEVON SPINNING WHEELS Devon Spinning Wheels were located in Newton Abbot, Devon and advertised in The Journal no. 167, September 1993. They were offering two designs: ELEANOR, an upright spinning wheel based on a traditional design with "maintenance free longlife bearings", and MARGUERITTE, a sloping bed spinning wheel based on a traditional design with "maintenance free longlife bearings".


DOUGLAS ANDREW LTD  Known as a builder of looms for handweavers, but also made at least two types of spinning wheel. One was small three legged upright spinning wheel, makers name stamped into the rim of the drive wheel (seen on ebay) another was a Scandinavian style of wheel with a flat table and large drive wheel, as shown in the photo.

Douglas Andrew Scandinavian type spinning wheel


DRYAD - importers of the Norwegian wheels made by the Gylland family from around 1931 until the outbreak of the Second World War (1939) when it was no longer possible to trade with Norway. From then onwards Dryad commissioned a copy of the Gylland wheel made in England, first in pitch pine and later from beech wood. This was superceded later, and from the 1964 catalogue through to 1969 (possibly others, my set is incomplete) they were importing a different double-table wheel, probably made by Anders Olsen Wollan, the last known wheelmaker in Gylland who was making wheels between 1963 and 1983. By 1981 Dryad were stocking instead wheels made by Bernard AYLWARD and also HALDANE. You can discover the story of Gylland spinning wheels and the Dryad copies in The Spinning Wheels Sleuth issues #101 and #102.

Dryad copy of Norwegian spinning wheel


EASY-SPIN - made by Mr Jon Starkey of Midsomer, Norton, Avon, who was an engineer and is believed to have made many spinning wheels. An advert in The Weavers Journal, 121 Spring 1982 (but not other editions) said "British made upright type, hand crafted in Iroko, spindle to floor type to suit your requirements. Adjustable spindle speed for thick or thin yarn. No threading required. 3 large capacity quick change bobbins."

Easy-Spin spinning wheel


FRANK HERRING AND SONS  Imported scandinavian wheels and later wheels from New Zealand, often sold with a Frank Herring and Sons name plate added, later moved into selling wheels they designed and commissioned. The wheels made in Britain were ALPHA folding wheel with an aluminum flyer, frame and drive wheel of which seems to have been a single batch made and on sale in 1987-9; the HERRING CASTLE WHEEL, made in 1997; the HERRING WHEEL which had a bent plywood frame of which around 1,000 were sold between 1983 and 2015. The Herring wheel won an award from the London Design Centre for aesthic design. Batches of the Herring wheel may also bear the maker's name, see entries below for HERRING GORDON and SHAPWICK BLAISE HERRING. Note: parts for the Herring are still available from Frank Herring & Sons.

Frank Herring & Sons spinning wheel, bent plywood frame Herring Alpha spinning wheel Left: the Herring Wheel (bent plywood frame), right, Herring Alpha. The Alpha treadle folds up for transport.


GORDON CLARKE - of Spinners Gallery, Market Place, Marazion, Penzance. Listed as a spinning wheel maker by Mabel Ross in her The Essentials of Yarn Design for Handspinners (1983), see WILLIAM GORDON CLARKE listing below.


GORDON GENTLES - of The Station, Strathpeffer, Dingwall, Ross-shire, Scotland. A "Hebridean Spinning Wheel" by this maker, which looks typical of the traditional wheels used in the Hebridean islands, is pictured in Mabel Ross's Encyclopedia of Handspinning page 198. A correspondent tells me she has two wheels made by Gordon Gentles, a small Shetland-type made in 1982 and a large Saxony type, made in 1985. She adds "He must have come to the attention of Mabel Ross around that time because she listed him in her appendix, "Spinning Wheel and Equipment Suppliers", (p119), The Essentials of Yarn Design for Handspinners. I believe he had a long list of orders resulting from this."


GRANVILLE SWANNEY of Orkney. Maker of the Traditional Orkney spinning wheels in both upright "spinney" and sloping bed forms. The sloping bed style was an older tradition on Orkney, upright spinney wheels were introduced from the Shetland Isles at the end of the 19th century. Granville's spinning wheels have the three distinctive characteristics common to Orkney wheels: chamfered treadle, dumbbell-shaped drive wheel spokes and two drive bands on the drive wheel, one driving the flyer and the other the bobbin. These features are also found on wheels from other parts of northern Scotland, but became traditional characteristics used over again for Orkney wheels.

Granville Swanney Orkney spinning wheel

Special page with more photos of Granville Swanney spinning wheels


HALDANE, of Fife, Scotland. Special page dedicated to the Haldane spinning wheels here. The model names are HARRIS,  HEBRIDEAN, LEWIS, ORKNEY, SHETLAND. Photos below left to right: Harris, Shetland mark 1, Hebridean, Lewis with rectangular table, Lewis with curved table, Orkney.

Haldane Harris 3 Haldane Shetland Haldane Hebridean Haldane Lewis Rect table Haldane Lewis curved table Haldane Orkney


HAMISH POULSON - late 20th/21st Century maker of Shetland Spinney wheels, signed JD Poulson (Hamish is the Gaelic form of James). Believed to have made "hundreds". Living on Yell, Shetland, Hamish made both saxony style and small upright spinning wheels in a style traditional to the Shetland Isles. See also DP Poulson.

Hamish Poulson Shetland spinning wheel

Special page with more photos of Hamish Poulton spinning wheels

HARRY POUNCEY (various designs, possibly many different ones), lived in Moniaive, Dumfries, Scotland, a retired Rolls Royce engineer, Harry was making spinning wheels in the 1970s and 1980s. A founder member of the Dumfries Guild of Weavers, Spinners and Dyers. Harry signed his spinning wheels on the underside of the treadle. Designs were: Black Forrest; Two Column Black Forrest; Austrian; Craigdarroch; Norwegian; Pennefilian (based on a Finnish flax wheel). A skein winder and lazy kate were optional additions to all the wheels and he also made a free standing skein winder, stool, chair, box type lazy-kate. When he stopped making wheels he trained Neville Smith who took over from him and made wheels up until 1991. Neville also signed the wheels that he made on the underside of the treadle.

Below: first two photos are of the same wheel, we know this was made by Harry Pouncey from his signature but do not have the model name, it is possibly a simplified verison of his Black Forest wheel; the next wheel is the smallest one made by Harry, called "The Austrian", with a 15" drive wheel; fourth picture from left is the Craigdarroch (this one pictured has the optional lazy-kate) based on a Tyrolean design; fifth is the Norwegian.

Harry Pouncey spinning wheel 1Harry Pouncey wheel 1 side view Harry Pouncey spinning wheel 2 Harry Pouncey Craigdarroch spinning wheel


HERRING and HERRING ALPHA - see above entry for FRANK HERRING AND SONS.


HERRING GORDON WHEEL - made by WILLIAM GORDON CLARKE. Possibly the first version of the well known bent plywood Frank Herring & Sons spinning wheel, pictured in Mabel Ross's Encyclopedia of Handspinning 1988. Later made by Shapwick Blaise for Frank Herring & Sons; and other batches were made by other makers.


HIGHAM  A couple of reports have been received of spinning wheels signed "Higham" with the Bury-St Edmunds phone number 810857. If you have any information about this maker please get in touch.


HOPKINS - Mr Hopkins of Fillongley, Warwickshire made spinning wheels which he sold at local craft fairs in around 1988-90. The one pictured below is made from London Plane wood. Also known to have made curved-back handcarders.

Mr Hopkins spinning wheel


ICENI WHEELS: two different models of spinning wheel The Iceni and the Iceni Trinovante. They were made by two men working in Ipswich, Suffolk, in the late 1970s/1980s using kiln dried beech wood. The wheels were sold by a local spinning tutor Eileen Ringwood of Diss. The ICENI is an unusual design of upright spinning wheel with a triangular frame, an 18" diameter drive wheel, ratios 1:6 and 1:9. Also the ICENI TRINOVANTE. An advert in The Journal for Weavers Spinners and Dyers no. 123 Autumn 1982 said "we produce two wheels of our own design at £29.50 and £100. Please send S.A.E. for details.".

Iceni IceniThe Iceni


J.A.N. BURRA  - Dingle Hill Products, Mid Cowden, Comrie, Perthshire, Of Perthshire. Made an electric spinner and also a wheel described by Mabel Ross in her Encyclopedia of Handspinning 1988 as "Shetland style". In her book The Essentials of Yarn Design for Handspinners she notes "also makes electric spinner".


JACK GREENE  Maker of great wheels, mostly sold to re-enactors.


Colonel JAMES INNES, an engineer and inventor who retired to the Isle of Arran where he made three models of spinning wheels based on traditional designs. The designs were chosen after travelling around Scotland and visiting museums to carry out historical research. The wheels designs are: Argyll, St Kilda (both of these have the drive wheel on the right) and the Foula, which is an upright wheel. Colnel James' wheels were sold through the workshop of Lynn Gray Ross, also on Arran, who taught many people to spin. In an article for YarnMaker no. 28 Lynn said: "I lost count of the number of wheels he made but each was a masterpeice of precision and could produce yarn as different as Sheltand lace for shawls and lump, textured 'art' wool, perfect for weaving tapestries". Lynn met him shortly after arriving on Arran in 1975 and he died in 1983.


JAMES WILLIAMSON - see Timbertops.


JIM HENNEQUEN - maker of a "fine 25 1/2" diameter ash wheel" photographed on p.19 of Jill Goodwin's book A Dyer's Manual, first published in 1982. Jim's wheels have his signature under the table and the address of a farm near Hay-on-Wye. The style of the wheel is saxony with a sloping table, large drive wheel and tall maidens. The design is fairly plain, the wheel spokes are straight with no shaping and the wheel supports are wide and flat, not turned.

Jim Hennequen spinning wheel

Click here for more photos of the spinning wheel made by Jim Hennequen.


JOHN BAIN believed to be a Scottish wheel maker, the name is typical of Orkney/Shetland/Aberdeen areas and the wheel photographed turned up in Aberdeen in 2012. It is a delicately proportioned upright wheel, no ornate turnings, and relatively tall. (Height unknown, but the purchaser in 2012 found it too tall for comfort.) It is reported from observation of the upright wheel supports that it is possible that this wheel originally had a distaff.

John Bain spinning wheel


JOHN BRIGHTWELL made spinning wheels and other items at his workshop at Crinkle Birr Cottage, Higher West Hatch, near Taunton, Somerset. He is a member of the Dorset Guild of Master Craftsmen. Wheels made include the BIG JOHN (below, left) which is Scandinavian in style with a large 24" drive wheel.diameter drive wheel and a flat bed and was offered in softwood, light Oak and dark Oak with the option of a distaff. His smaller saxony spinning wheel (2nd from left) with a 16" diameter drive wheel was offered in dark oak, light Oak, Utile (Mahogany) and natural Ash. He also made the small upright wheel (3rd from left) and other designs. Other items made include spinning chairs in light and dark Oak and bobbin (or swearie) boxes, one of these is seen with the upright wheel below.

John Brightwell Big JohnJohn Brightwell saxony John Brightwell upright


JOHN MANNING of St Albans, Hertfordshire. Not much known about this maker other than an advert in Weavers Journal no. 118, Summer 1981, saying "Horizontal Spinning Wheel for £34. I make three different models and can supply them with lazy kates, hand spindles and carders to order. Send s.a.e. for leaflet/prices."


JOHN SEYMOUR  Wheels sold through Little London Spinners of Romsey, Hampshire. John Seymour was making upright spinning wheels in 1983 and also made a saxony wheel with beautiful marquetry inlay decoration, people who ordered new wheels were offered a choice of different inlay designs. Matching accesories include spinning chair and lazy kate that holds 5 bobbins. The saxony wheel pictured is made in mahogany with yew inlay, and has a removeable distaff, the owner told me owner told me "There were a couple of designs and you could have whatever inlay you liked. These wheels all spun beautifully.I ordered a Mahogany double drive Saxony wheel with a yew inlay and matching chair." Another spinner who also bought her wheel at Little London Spinners told me "It was explained that this wheel had been made by a local craftsman and we were shown photographs of wheels he made to order. If he was not too busy he would make a wheel that could be sold in the shop. The wheels are all wooden pegged, the only metal parts being the orifice and the bar holding the wheel in place". A third owner says "I too have a Saxony John Seymour wheel, made from a dark hard wood and it has an inlaid flat bed and all the parts are held in place with brass pins, the tops of theses are also inlaid. It s one of my greatest treasures!"

John Seymour Spinning Wheel


JONATHON NOAD of Halton Fenside, Lincolnshire. Advertised in The Journal for Weavers, Spinners and Dyers edition 136, Autumn 1985: "wheels, skeiners, chairs, niddy-noddys, etc., made to order. Special features or designes to suit your personal requirements". This is all the information I have so please get in touch if you can assist with information and / or photos for the wheels made by Jonathon Noad.


KEITH AND LOIS BERNEY of Lewes, East Sussex. Makers of the "Southover" wheel, a lightweight upright spinning wheel, which incorporated special inovative features which they protected under GB patent GB2047281A. These included a weight on the end of the flyer arm to give added momentum to the flyer, quote from the patent application: "To the rear of the bearing a stretchable single drive band extends over differing spindle pulley sizes and together with a flywheel produces variable spinning speed with unaffected treadle or drive momentum." ie the spinner can move the drive band onto a different flyer whorl (or spindle pulley) to change the speed the flyer is going around without having to treadle any faster or slower. There was also an easy to thread "eye" rather than orifice on the flyer and a "slidable friction-held thread guide". The patent was filed in 1979 and granted in 1980.An advert appeared in The Journal no. 132, 1984 which mentioned that the "already portable" wheel was "now dismountable + carrying case". I have been contaced by spinners still using these wheels in 2018.

Berney Southover spinning wheels


LEADBETTER Made wheels that are a copy of Canadian production wheel(also known as CPW)type wheel and also great wheels. The large Ash and Walnut CPW-type spinning wheels have a 27 3/8" (96cm) diameter drive wheel and unusual system for tensioning the drive band. They appear to be copied from the work of the Canadian maker Guy Ouellet who used the same tension system and treadle shape but his wife told me that the original wheel did not work well and Mr Leadbetter improved the design. Wheels were sold via a shop (or couple of shops?). Writing under the table of my wheel says "GJL780 Elland Wharfe 0043a" possibly indicating that it was made in July 1980. Link here to a special page for Mr Leadbetter's wheels.

Leadbetter spinning wheel


LEONARD WILLIAMS of The Forge, Whitchurch, Bristol. Maker of small upright spinning wheels with a solid drive wheel and some in a saxony style, possibly other styles as well (possibly working during 1970s-80s? more info needed). Reports say these wheels "spin fine". The upright wheel photographed below left has a small brass name plate set into the top surface of the front left corner of the table. Click here for more detail about Leonard Williams' spinning wheels including more photos.

Leonard Williams upright spinning wheel Leonard Williams saxony spinning wheel


LISLECRAFT - initially Fleet, Hampshire (1980); had moved to the Isle of Wight by 1982. Advertised in the inc. no. 117, Spring 1981. Collapsible spinning wheels and chairs made from elm, assembled without screws. Advert says that special features of the wheel were patent protected and design registration to the chair is pending. "Hand-made, these wheels and chairs require no tools for assembly or dissassembly which takes about five minutes for the wheel and one minute for the chair". Fetaures were "special design of yarn guide needs no threading at all"; the lazy kate had a "special lock" for plying; "simple system for protecting yarn from over-twisting or untwisting" by turning of the wheel whilst unattended.

Lislecraft spinning wheel


PETER S MANSON - spinning wheel maker of Scatness, Shetland. Made a small, compact upright spinning wheel in 1992, double drive but with a bar between the maidens so it can also be set up with scotch tension. The flyer has close-spaced wire hooks, and it would be ideal for spinning fine yarns.

Peter S Manson Shetland spinning wheel


POLSON - see D P Polson and Hamish Polson.


MARTIN REEVE see P&M WOOLCRAFT First made spinning wheels in the late 1970s when he adapted a design in The Woodworker magazine. Martin was working in the car industry at the time and used his engineering skills to redesign the wheel so that it worked well. This is the same set of plans that started James Williamson making wheels and is the basis of his "Lonsdale" wheel design.


MICHAEL BRADLEY - Faringdon, Oxfordshire. Listed as a spinning wheel maker by Mabel Ross in her The Essentials of Yarn Design for Handspinners (1983).


MILSON of Scotland, little known but the name and this photograph of a spinning wheel belonging ot an early member of the Christchruch, New Zealand, Guild of weavers spinners and dyers. It has a double (ie two) drive band (a single band in two loops is more common, but some Scottish and especially Orkney wheels, intended for spinning fine yarns, have two drive bands).

Milson of Scotland spinning wheel


MR D D MACLACHAN  Lived near York, made a reproduction Irish Castle wheel pictured in Mabel Ross's Encyclopedia of Handspinning 1988.


NEVILLE SMITH - took over from HARRY POUNCEY (see above) making spinning wheels to Harry's designs in the 1980s, up until 1991. He made the Penfillian wheel in the picture on p.83 of Mabel Ross's Encyclopedia of Handspinning (published in 1988).


P&M WOOLCRAFT – See also MARTIN REEVE  - Martin, who ran P&M Woolcraft with his wife Pauline, built spinning wheels from time to time starting in the late 1970s into the 21stC. Three main designs that he made are the MACDONALD – "an upright spinning wheel, made in oak or yew, either single or double treadle"; the PINDON - "Traditional spinning wheel with a flattish bed."; the WESSON"In the classic saxony style" (descriptions are those whcih were used on the P&M Woolcraft website).

Pictured below: Pindon.

Martin Reeve Pindon spinning wheel


Mr D C Reeves, Somerset – see WESTBURY


PETER ROYLE Peter Royle, of Leyland, Lancashire, made a saxony type spinning wheel called "THE COUNTESS". Mabel Ross’s Encyclopedia of Handspinning (1988) says on page 99: ”a versatile wheel with twist ratios up to 12:1, well-spaced draw-on ratios, an easily removable wheel for transport and alternative flyer assemblies for very fine and very thick yarns”. The drive wheel was described as 50cm diameter by an ebay seller. An advert in The Weavers Journal no. 128 Winter 1983 said: "Finest engineering, beautiful timber and traditional style make this a wheel to use and treasure. Acclaimed by leading spinners throughout the country." It is believed that he also made an upright wheel in Yew wood, which might have been called "Peacock". The wheel pictured below is a Countess, a plaque on the top surface of the table bears the maker's mark, name and phone number, the name of the person for whom it was commissioned, and the date of June 1992.

Countess spinning wheel, by Peter Royle


PETER TEAL made more than one style of spinning wheel (as well as his famous wool combs), an advert in The Weavers Journal no. 88, Winter 1973, announced "to enable me to devote more time to the restoration of old and antique wheels, and to the making of special designs, I am discontinuing the production of my standard wheels".

Peter Teal upright spinning wheel


REDGATES Little known, small advert from private seller in The Weavers Journal no. 163 September 1992 said "Superb Redgates spinning wheel, oak, 8 bobbins, double-treadle for effortless spinning"


ROGER COLTMAN Of Hook Norton, Oxfordshire. Made an upright mahogany spinning wheel, we don't know how many. One that was sold in 2023 is marked with three stamped numbers adjacent to a small cat motif, and also has a small sticker with the maker's name and address. The new owner says "This wheel spins perfectly. Its a really lovely item.".

Roger Coltman spinning wheel Click here for more photos of a Roger Coltman wheel.


ROGER SEAR "Kingston Spinners" maker of spinning wheels in several different styles, who lived near Kingston Beach, at Shoreham-by-Sea, West Sussex. He he collected the driftwood he used in wheel making at Kingston Beach and some of his wheels have the name "Kingston" carved into the rim. Mr Sear took up making wheels after he retired from civil engineering and had learnt to spin as whilst recovering from a heart attack. He was already a skilled woodworker and had made curved handrails for stairs at the British Museum and for a hospital at Midhurst. Making his own spinning wheels were his wife's suggestion, and Mr Sear started off with a visit to the science museum to make notes and sketches of different wheels. His first wheel was a replica of a 1620 saxony wheel with signs of the zodiac carved around the rim. All the wheels we have come across have decorative carving on the rims, including flowers and ivy leaves. Click here for pdf download of an article about Roger Sear (2MB) with photos of three of his spinning wheels, written by Dorothy Lumb and first published in YarnMaker magazine edition 14.

RogerSear1 Just one of Roger Sear's wheel designs, many are decorated with carved designs. Roger Sear carved wheel detail


SHAPWICK BLAISE of Broadstone Barn, Walditch, Bridport, Dorset. Probably the second makers of the bent plywood spinning wheel commissioned by Frank Herring & Sons of Dorchester, Dorset, see entry for FRANK HERRING AND SONS above, and later made the Shapwick Blaise wheel in a similar style. The Shapwick Blaise wheels have been seen with two diffent styles of drive wheel, one is a solid disk with round holes to reduce the weight and balance the wheel, the other is the same style as the Herring. According to Companies House, Shapwick Blaise Limited was set up in 1983, last filed annual accounts for 1985, and was put into compulsory liquidation in 1987, so they were not trading long and we don't know how many wheels were made. Shapwick Blaise wheels may be signed by "S.H. Williams", whose first name was Simon.


SOUTHOVER - SEE KEITH AND LOIS BERNEY


The SPLINTER GROUP – see WESTBURY


STARKEY - Mr Jon Starkey made the "Easy Spin" wheels, see above under EASY-SPIN.


STEWART THOMPSON of Fair Isle, Shetland. Maker of Shetland spinning wheels.

TED WHITE, based in North Wales, maker of great wheels.


TIMBER TOPS TABLE CO SEE 'TIMBERTOPS', this is an earlier name used by the same makers, James and Anne Williamson of Ashfordby, Leciestershire, England.


TIMBERTOPS - made by James and Anne Williamson of Ashfordby, Leciestershire, England. Their wheels were made in used Oak (natural or fumed finish) and Yew woods from 1975 to 2008 (business sold & after 2009 Timbertops wheels made in smaller range but wider variety of woods by Woodland Turnery). The Williamsons started out making wooden items for the home including small tables, hence the original name of Timber Tops Table Co. Around 80-90% of the Timbertops wheels were exported either direct to individuals or for sale through dealers. Models include: BEAVER double treadle spinning wheel with two drive wheels to accelerate the flyer, ratios 1:10 to 1:25; CHAIR WHEEL based on American chair wheels of 1700s mainly from Conneticut. Double treadle with two drive wheels to accelerate the flyer and maidens on either side of the wheel enabling the flyer to be used on either side. ratios from 1:10 to 1:30. 34" tall; GREAT WHEEL three legs to the table, 40" diameter drive wheel, spindle 9" x 3/8", some had an accelerating head increasing the standard ratio of 1:50 to 1:150; IRISH CASTLE WHEEL based on the traditional "Ulster Wheel" with either an 18" or 21" drive wheel above the flyer, height 50", single treadle; LEICESTER made in yew and oak, compact flat bed Scandinavian type wheel, four legs, single or double treadle, built in lazy kate, 24" drive wheel, standard flyer whorl gives ratios 1:8 and 1:10 but other smaller and larger whorls were made. Flyer may be either to right or left side of the drive wheel. Standard flyer has orifice size 3/8". Some early wheels have a horseshoe shaped flyer, later ones had a U shaped flyer made in seven parts for strength; LONSDALE upright wheel with 18" drive wheel and flyer set to one side. Built in lazy kate. Standard ratios 1:8 and 1:10. This wheel is one developed from a design originally published in The Woodworker magazine in the 1970s, Martin Reeve also adapted this design and produced the MacDonald, and there are many similar wheels made from the plans in The Woodworker by other makers which look similar but do not necessarily have the improvements which turned what was an ornamental desgin into a good working spinning wheel. If you find a wheel like this look for either the Timbertops name or James Williamson's signature to confirm that it is a Lonsdale and not by another maker; MOWBRAY more ornate than the Thurmaston with a 21" 12 spoke wheel with extra short stub spokes in between. Standard ratios 1:9 and 1:11, alternatives from 1:6 to 1:14; SHERWOOD 31" drive wheel with double treadle based on the large Canadian wheels called "CPW" or Canadian Production Wheel because of their speed; THURMASTON ( drive wheel sizes 19", 21" 24") sloping bed spinning wheel, standard flyer whorl gives ratios 1:8 and 1:10 but other smaller and larger whorls were made; SUITCASE a wheel based on the smallest Thurmaston with screw in legs that could be removed for travel. James Williamson has also made small upright "parlour" type spinning wheels to special order. Below, left to right, Lonsdale, Leicester, Mowbray, Sherwood, Thurmaston (19").

Timbertops Lonsdale spinning wheel Timbertops Leicester spinning wheel Timbertops Mowbray spinning wheel Timbertops Sherwood spinning wheel Timbertops Thurmaston


TIM WOOD, CARDIFF. A spinning wheel advertised on Ebay UK in July 2016 looking similar to Scandinavian wheels with a large diamater drive wheel, steeply sloping table, tall thin maidens, had this description Oak spinning wheel made by Tim Wood, Cardiff, # 10. Beautiful joinery. Wheel is 24 inch diameter...Originally 400 gbp. In response to a query the seller also said that there were four grooves on the flyer whorl, ranging from approx 6.5cm to 4cm diameter. If you know anything about this maker and his spinning wheels, and especially if you can provide photographs, please get in touch.

Probably the same maker as the T M WOOD Of Barry, South Glamorgan, Wales. Advertised in The Weavers Journal no. 163. September 1992 Traditional sloping-bed Spinning Wheels, hand-made from seasoned British oak or ash. 24" Wheel. Ratios available to your specification.


TONY DEVONALD maker of a double=drive saxony type spinning wheel sold through Spindles of Canterbury. This wheel is unusual in that the flyer and bobbin are supported by a single maiden behind the flyer whorl and the flyer arms are removable for access to the bobbin.


TOM JONES of Devon made at least one spinning wheel in oak with beautiful carvings. It is dated 1988 and came with spare bobbins, lazy kate and niddy-noddy.

Follow this link for a special page dedicated to the spinning wheel made by Tom Jones.


TWO RIVERS STUDIO of Longnor, Staffordshire in the Peak District. Around four or five models of spinning wheel made in the late 1980s. Models included: DOVE, a small upright spinning wheel, made of oak, and MANIFOLD a sloping bed spinning wheel.

Two Rivers Studio ManifoldTwo Rivers Studio Dove

Picture left shows the Two Rivers Studio spinning wheel Manifold, right shows the Dove.


VICTOR EDWARDS HAWKHURST advertised both wheels and looms in The Weavers Journal, winter 1976. Had previously worked for the Harris Loom company. We have seen photos of a Westbury spinning wheel with a label bearing the name Victor Edwards Hawkhurst, so possibly this is the type of wheel that he sold.


WESTBURY Based on an traditional Cotswold design (according to Mabel Ross in her Encyclopedia of Handspinning, 1988) they were originally made by Elton Crafts of Westbury, Wiltshire, then from the early 1980s by The Splinter Group of The Old Brewery, The Close, Warminster, and according to Mabel Ross, from 1984 by Mr D C Reeves of Somerset. Various different woods were used. The Westbury has a weighted drive wheel and a treadle that pivots with heel behind the treadle bar so that it is possible to treadle by rocking the foot, pushing with both heel and toe. They are designed to be use either in double-drive (see here for how to fit a double-drive band) or single drive with the drive wheel driving the flyer and a scotch tension brake on the bobbin. The flyer has a 1/12" orifice and the lazy kate consists of three wooden posts either situated on the flyer end of the table or on the table in front of the drive wheel. These wheels remain popular, liked for being compact and easily carried, because they spin well, and have been described as a "little workhorse".

Westbury spinning wheel Left: a Westbury spinning wheel.


WILLIAM GORDON – see William Gordon Clarke


WILLIAM GORDON CLARKE / WILLIAM GORDON / GORDON CLARKE Saxony wheel with 26" drive wheel (one sold on ebay was described as 25.5" so they may vary). William Gordon Clarke's workshop was initially in Hay on Wye, he later moved to Marazion, Penzance, Cornwall, which was given as his address in 1983 by Mabel Ross in her Essentials of Yarn Design.

Maker's description from his leaflet about the spinning wheel pictured below: "The design is based on an old style working wheel with modern fittings on the main moving parts. Whilst not intended to be a reproduction piece it has an initial mellow appearance of a well used wheel and has been described as one of tomorrow's heirlooms. Each wheel is handbuilt with its number, the date and the maker's name cut in the underside of the stock." Various woods were used for making these wheels, mine is made in Elm, no. 19, made in May 1981.

Link to William Gordon Clarke page for some extra information

William Gordon Clarke spinning wheel Left: by William Gordon Clarke.


WILLIAM HALL Winchcombe Pottery, Winchcombe, Gloucestershire. Made a Scandinavian type spinning wheel with a 24" drive wheel which he advertised in The Weavers Journal, no. 100, Winter 1976. The photo shows a"double-table" type wheel in the style sometimes called "Norwegian" and the main table has sides that curve inwards, the wheel spokes are straight without turning or tapering, there are three legs.


WILLIAMSON, JAMES – see Timbertops


WILLIE PETRIE - Orkney wheel maker, lived in Orkney, Scotland, and made wheels a style traditional in those islands (although they may also be found in the north of mainland Scotland?) dumbell shaped spokes, a treadle chamfered on the front edge, and a drive wheel with two grooves to take two separate drive bands, one to drive the bobbin and one to drive the flyer. Willie Petrie's wheels are signed with a name stamp.

Willie Petrie spinning wheel

 


Mystery Wheels - can you help with identification?

This wheel was bought in 1980 from The Village Craft Shop in Forest Row, Sussex, England. The style is similar to Finnish wheels, however it is believed to be made in England. Click here to see enlarged image.

 



Website copyright 2013-2024 Dorothy Lumb. Contact me via the YarnMaker website.